Multi-Strand Twisted Copper Cuff | Heavy Rope Weave | 10 AWG
Dense, bold, and unmistakably handmade — this copper cuff is twisted from multiple strands of solid 10-gauge copper wire into a tight, uniform rope profile with a satisfying weight on the wrist. TIG-welded ends fuse every strand into seamless solid copper terminals with no solder, no caps, and nothing that will ever fray or separate. Finished with a forced antique patina and hand-buffed highlights that make the twist come alive.
Forged with Precision & Purpose
Built from solid 10 AWG copper strands, this cuff is hand-twisted under tension to create a clean, uniform rope profile. Rather than using solder or end caps, the ends are fused using TIG welding to melt the individual wires into seamless, solid copper terminals. This creates a permanent bond that won't fray, pull, or separate over time.
Aged to Perfection
Each cuff undergoes a multi-step finishing process: forced patination deepens the recessed grooves, while selective hand-buffing brings the high points to a soft metallic shine. This contrast highlights the geometric flow of the twist while giving the piece an antiqued character straight out of the shop.
Key Details:
- Material: Solid 10 AWG Pure Copper Wire
- Construction: Multi-Strand Tight Rope Twist
- Joinery: TIG-welded heat-fused ends for ultimate durability (no solder)
- Finish: Forced patina with hand-buffed highlights
- Fit: Slightly adjustable open cuff format for a comfortable, contoured fit
⚒ Made to Order
Each piece is handcrafted after your order is placed. Please allow up to 15 business days for your cuff to be made and shipped out.
🖐 How to Find Your Size
-
Wrap a piece of string or paper snugly (just slightly snug) around your wrist bone.
-
Mark where the ends meet, then lay it flat against a ruler.
-
Order your exact wrist measurement—don't add extra room. The 1-inch gap built into the cuff gives you the clearance you need to put it on.
📐 Size Chart
• Small: Wrist : 5.75"–6.0" | Metal Length: 5.0"–5.25" | Gap: 0.75"–1.0" | Total Fit: 5.75"–6.0"
• Medium : Wrist: 6.25"–6.75" | Metal Length: 5.5"–5.75" | Gap: 1.0"–1.25" | Total Fit: 6.5"–7.0"
• Large : Wrist: 7.0"–7.5" | Metal Length: 6.0"–6.25" | Gap: 1.0"–1.25" | Total Fit: 7.25"–7.5"
• X-Large : Wrist: 7.75"–8.25" | Metal Length: 6.5"–6.75" | Gap: 1.25"–1.5" | Total Fit: 7.75"–8.25"
Custom sizing also available. select the custom box and someone will email you once the order has been received.
🔧 Wearing & Adjusting
-
Putting it on: Roll the cuff on from the side of your wrist just above the bone. Don't yank it open to pull it straight over your arm.
-
Dialing in the fit: Give the cuff a gentle, firm squeeze once to set it to your wrist. Avoid bending it open and closed repeatedly so the copper stays rock-solid.
✨ Care & Maintenance
Keep your copper cuff looking its best with simple daily care:
-
Avoid Lotions & Oils: Moisture, harsh chemicals, body lotions, and skincare oils speed up oxidation and cause skin discoloration (greening). Put your cuff on after applying cosmetics.
-
Daily Wipe Down: After wearing, wipe the interior and exterior down with a soft, clean cloth to remove skin oils and sweat before storing.
-
Light Cleaning: If soiled, wash with mild dish soap and warm water using a soft-bristled brush (like a soft toothbrush) to clear buildup from the weave.
-
Rinse & Dry Thoroughly: Rinse completely with clean water, dry thoroughly with a towel, and buff with a soft cloth to restore shine.
For deep cleaning, patina restoration, and long-term wax protection steps, visit our full [Care & Cleaning Guide].