5-Strand Flat braided copper cuff | 12 AWG

Rugged craftsmanship meets structural symmetry — this handmade copper cuff is woven from five strands of solid 12-gauge copper wire into a tight diagonal plait, creating a broad profile with an unmistakable tactile depth and reassuring weight on the wrist. Built to last a lifetime, the ends are autogenously TIG-welded into seamless copper terminals with zero filler metal. Hand-buffed to a brilliant mirror shine, every contour of the weave catches the light while maintaining a smooth, snag-free profile.

5-Strand Diagonal Plait Craftsmanship

Built with structural integrity in mind, this piece uses a precision plaiting technique:

• Hand-Platted Weave: Five continuous strands of solid 12 AWG bare copper wire are systematically hand-braided into a flat, interlocking diagonal weave that maintains exceptional torsional rigidity and lays comfortable and flush against the wrist.

• TIG-Fused Terminals: To anchor all five strands permanently, the ends are autogenously TIG-welded into smooth, solid copper terminals with zero solder, alloys, or external filler metal for a seamless, lifelong bond.

• Mirror-Buffed Finish: Torch-annealed, hand-trued, and buffed to a high-luster mirror polish that highlights the rich contours of each wire strand, then sealed with microcrystalline wax for lasting protection

Key Details:

• Materials: Pure solid bare copper (12 AWG wire)
• Craftsmanship: Hand-braided 5-strand diagonal plait
• Seamless Fusion: TIG-fused terminal ends with zero filler rod for a smooth, snag-free finish and lifelong structural integrity
• Finish: Hand-buffed high-luster mirror finish; sealed with microcrystalline wax
• Fit: Slightly adjustable open cuff format for a comfortable, contoured fit

⚒ Made to Order
Each piece is handcrafted after your order is placed. Please allow up to 15 business days for your cuff to be made and shipped out.

🖐 How to Find Your Size

1. Wrap a piece of string or paper snugly (just slightly snug) around your wrist bone.

2. Mark where the ends meet, then lay it flat against a ruler.

3. Order your exact wrist measurement—don't add extra room. The 1-inch gap built into the cuff gives you the clearance you need to put it on.

📐 Size Chart

• Small: Wrist : 5.75"–6.0" | Metal Length: 5.0"–5.25" | Gap: 0.75"–1.0" | Total Fit: 5.75"–6.0"

• Medium : Wrist: 6.25"–6.75" | Metal Length: 5.5"–5.75" | Gap: 1.0"–1.25" | Total Fit: 6.5"–7.0"

• Large : Wrist: 7.0"–7.5" | Metal Length: 6.0"–6.25" | Gap: 1.0"–1.25" | Total Fit: 7.25"–7.5"

• X-Large : Wrist: 7.75"–8.25" | Metal Length: 6.5"–6.75" | Gap: 1.25"–1.5" | Total Fit: 7.75"–8.25"

Custom sizing also available. select the custom box and someone will email you once the order has been received.

🔧 Wearing & Adjusting

• Putting it on: Roll the cuff on from the side of your wrist just above the bone. Don't yank it open to pull it straight over your arm.

• Dialing in the fit: Give the cuff a gentle, firm squeeze once to set it to your wrist. Avoid bending it open and closed repeatedly so the copper stays rock-solid.

✨ Care & Maintenance

Keep your copper cuff looking its best with simple daily care:

• Avoid Lotions & Oils: Moisture, harsh chemicals, body lotions, and skincare oils speed up oxidation and cause skin discoloration (greening). Put your cuff on after applying cosmetics.

• Daily Wipe Down: After wearing, wipe the interior and exterior down with a soft, clean cloth to remove skin oils and sweat before storing.

• Light Cleaning: If soiled, wash with mild dish soap and warm water using a soft-bristled brush (like a soft toothbrush) to clear buildup from the weave.

• Rinse & Dry Thoroughly: Rinse completely with clean water, dry thoroughly with a towel, and buff with a soft cloth to restore shine.

For deep cleaning, patina restoration, and long-term wax protection steps, visit our full [Care & Cleaning Guide].