Copper Cuff Bracelet | 3-Strand Twisted | Heavy Gauge

Copper Cuff Bracelet | 3-Strand Twisted | Heavy Gauge

Small
$25.00
Skip to product information
Copper Cuff Bracelet | 3-Strand Twisted | Heavy Gauge

Copper Cuff Bracelet | 3-Strand Twisted | Heavy Gauge

$25.00
size

Bold, substantial, and built to last a lifetime — this handmade copper cuff is forged from three strands of heavy 10-gauge solid copper wire, hand-twisted under tension and TIG-welded at the ends for a seamless, permanent bond. No solder. No shortcuts. Just solid copper craft with a forced patina and hand-buffed finish that gives each piece its own character straight out of the shop.

Forged with Precision & Purpose
Built from three individual strands of heavy-gauge 10 AWG solid copper wire, this cuff is hand-twisted under tension to create a tight, symmetrical rope profile. Rather than using solder or caps, the ends are fused using TIG welding to create a seamless, solid copper bond that will never fray, snag, or separate over time.

Aged to Perfection
Each cuff undergoes a multi-step finishing process: forced patination deepens the recessed grooves, while selective hand-buffing brings the high points to a soft metallic shine. This contrast highlights the geometric flow of the twist while giving the piece an antiqued, worn-in character straight out of the shop.

Key Details:

  • Material: Solid 10 AWG Pure Copper Wire
  • Construction: 3-Strand Tight Twist
  • Joinery: TIG-welded ends for ultimate durability (no solder)
  • Finish: Forced patina with hand-buffed highlights
  • Fit: Slightly adjustable open cuff format for a comfortable, contoured fit

⚒ Made to Order

Each piece is handcrafted after your order is placed. Please allow up to 15 business days for your cuff to be made and shipped out.

🖐 How to Find Your Size

  1. Wrap a piece of string or paper snugly (just slightly snug) around your wrist bone.

  2. Mark where the ends meet, then lay it flat against a ruler.

  3. Order your exact wrist measurement—don't add extra room. The 1-inch gap built into the cuff gives you the clearance you need to put it on.

📐 Size Chart

• Small: Wrist : 5.75"–6.0" | Metal Length: 5.0"–5.25" | Gap: 0.75"–1.0" | Total Fit: 5.75"–6.0"

• Medium : Wrist: 6.25"–6.75" | Metal Length: 5.5"–5.75" | Gap: 1.0"–1.25" | Total Fit: 6.5"–7.0"

• Large : Wrist: 7.0"–7.5" | Metal Length: 6.0"–6.25" | Gap: 1.0"–1.25" | Total Fit: 7.25"–7.5"

• X-Large : Wrist: 7.75"–8.25" | Metal Length: 6.5"–6.75" | Gap: 1.25"–1.5" | Total Fit: 7.75"–8.25"

Custom sizing also available. select the custom box and someone will email you once the order has been received.

🔧 Wearing & Adjusting

  • Putting it on: Roll the cuff on from the side of your wrist just above the bone. Don't yank it open to pull it straight over your arm.

  • Dialing in the fit: Give the cuff a gentle, firm squeeze once to set it to your wrist. Avoid bending it open and closed repeatedly so the copper stays rock-solid.

✨ Care & Maintenance

Keep your copper cuff looking its best with simple daily care:

  • Avoid Lotions & Oils: Moisture, harsh chemicals, body lotions, and skincare oils speed up oxidation and cause skin discoloration (greening). Put your cuff on after applying cosmetics.

  • Daily Wipe Down: After wearing, wipe the interior and exterior down with a soft, clean cloth to remove skin oils and sweat before storing.

  • Light Cleaning: If soiled, wash with mild dish soap and warm water using a soft-bristled brush (like a soft toothbrush) to clear buildup from the weave.

  • Rinse & Dry Thoroughly: Rinse completely with clean water, dry thoroughly with a towel, and buff with a soft cloth to restore shine.

For deep cleaning, patina restoration, and long-term wax protection steps, visit our full [Care & Cleaning Guide].

Disclosures

Copper & Skin Oxidation

🌿 A Note on Copper & Skin Oxidation

Pure, solid copper naturally reacts with air, moisture, and your body’s unique chemistry (such as sweat and natural skin oils). Over time, this natural oxidation can leave a harmless, temporary greenish mark on the skin where the cuff rests.

  • Why It Happens: This green tint is copper carbonate — a safe, natural byproduct of pure copper reacting with micro-moisture, skin pH, or everyday products like soaps, lotions, and cologne. It is non-toxic, completely harmless, and easily washes away with regular soap and water.
  • Our Process: We seal every piece with a protective coat of microcrystalline wax to preserve the shine and slow down oxidation. However, depending on your body chemistry and wear habits, the wax will gradually wear off, allowing the copper to develop its own rich, natural character and patina.
  • Minimizing Greening: To keep skin marking to a minimum, keep your wrist dry, avoid wearing your cuff while applying lotions or cosmetics, and wipe the inside down with a clean, soft cloth after daily wear.

You may also like