Cable-Laid Copper Cuff | 9-Strand Counter-Lay | 10 AWG

Inspired by structural wire rope engineering, this cuff features nine strands of heavy 10-gauge solid copper — twisted in groups of three, then counter-spun in the opposite direction to create a dense, herringbone-style cable weave that locks itself under tension and will never uncoil. The result is a piece with serious visual weight and a depth of texture that stops people mid-conversation. TIG-welded solid copper terminals, torch-annealed, and softly planished for a smooth, wearable finish.

Industrial Cable Engineering
Built with structural symmetry in mind, this piece uses a reverse-lay wire technique:

• First Pass: Nine strands of solid 10 AWG copper are separated into three groups of three and tightly twisted in a single lay direction.
• The Cable Spin: Those three twisted bundles are combined and spun under tension in the opposite direction. This counter-rotation locks the internal tension, creating a dense, herringbone-style cable weave that will not uncoil or loosen over time.

Fused Terminals & Hand-Planished Comfort
To anchor all nine strands permanently, the ends are TIG-welded into solid, rounded copper terminals with no solder or end caps. The entire assembly is torch-annealed and softly hammered between hardwood faces to shape the high ridges into a smooth, flush fit that won't grab arm hair or catch on clothes.

Key Details:

• Material: Solid 10 AWG Pure Copper Wire
• Construction: 9-Strand Counter-Lay Cable (3x3 reverse spin)
• Joinery: TIG-welded heat-fused ends (no solder)
• Comfort Finish: Softly planished between hardwood blocks for a smooth outer profile
• Finish: Forced antiqued patina deepens the cable grooves; hand-buffed high-relief highlights
• Fit: Slightly adjustable open cuff format for a comfortable, contoured fit

⚒ Made to Order
Each piece is handcrafted after your order is placed. Please allow up to 15 business days for your cuff to be made and shipped out.

🖐 How to Find Your Size

1. Wrap a piece of string or paper snugly (just slightly snug) around your wrist bone.

2. Mark where the ends meet, then lay it flat against a ruler.

3. Order your exact wrist measurement—don't add extra room. The 1-inch gap built into the cuff gives you the clearance you need to put it on.

📐 Size Chart

• Small: Wrist : 5.75"–6.0" | Metal Length: 5.0"–5.25" | Gap: 0.75"–1.0" | Total Fit: 5.75"–6.0"

• Medium : Wrist: 6.25"–6.75" | Metal Length: 5.5"–5.75" | Gap: 1.0"–1.25" | Total Fit: 6.5"–7.0"

• Large : Wrist: 7.0"–7.5" | Metal Length: 6.0"–6.25" | Gap: 1.0"–1.25" | Total Fit: 7.25"–7.5"

• X-Large : Wrist: 7.75"–8.25" | Metal Length: 6.5"–6.75" | Gap: 1.25"–1.5" | Total Fit: 7.75"–8.25"

Custom sizing also available. select the custom box and someone will email you once the order has been received.

🔧 Wearing & Adjusting

• Putting it on: Roll the cuff on from the side of your wrist just above the bone. Don't yank it open to pull it straight over your arm.

• Dialing in the fit: Give the cuff a gentle, firm squeeze once to set it to your wrist. Avoid bending it open and closed repeatedly so the copper stays rock-solid.

✨ Care & Maintenance

Keep your copper cuff looking its best with simple daily care:

• Avoid Lotions & Oils: Moisture, harsh chemicals, body lotions, and skincare oils speed up oxidation and cause skin discoloration (greening). Put your cuff on after applying cosmetics.

• Daily Wipe Down: After wearing, wipe the interior and exterior down with a soft, clean cloth to remove skin oils and sweat before storing.

• Light Cleaning: If soiled, wash with mild dish soap and warm water using a soft-bristled brush (like a soft toothbrush) to clear buildup from the weave.

• Rinse & Dry Thoroughly: Rinse completely with clean water, dry thoroughly with a towel, and buff with a soft cloth to restore shine.

For deep cleaning, patina restoration, and long-term wax protection steps, visit our full [Care & Cleaning Guide].