Dual-Gauge Copper Cuff | 5-Strand Hybrid Twist | 10 & 12 AWG

The one that breaks the mold — this hybrid copper cuff combines one heavy 10-gauge strand with four 12-gauge strands, hand-twisted together under tension to create a rope profile with subtle variation in texture and depth you won't find anywhere else. The mix of gauges gives the twist a natural, organic feel while still hitting that satisfying substantial weight. TIG-welded ends fuse all five strands into seamless solid copper terminals — no solder, no weak points, built to last.

Forged with Precision & Purpose
Built from solid copper strands, this cuff is hand-twisted under tension to create a clean, uniform rope profile. Rather than using solder or end caps, the ends are fused using TIG welding to melt the individual wires into seamless, solid copper terminals. This creates a permanent bond that won't fray, pull, or separate over time.

Aged to Perfection
Each cuff undergoes a multi-step finishing process: forced patination deepens the recessed grooves, while selective hand-buffing brings the high points to a soft metallic shine. This contrast highlights the geometric flow of the twist while giving the piece an antiqued character straight out of the shop.

Key Details:

• Material: Solid copper wire — 1x 10 AWG + 4x 12 AWG strands
• Construction: 5-Strand Dual-Gauge Hybrid Twist
• Joinery: TIG-fused ends for ultimate durability (no solder)
• Finish: Forced patina with hand-buffed highlights
• Fit: Slightly adjustable open cuff format for a comfortable, contoured fit

⚒ Made to Order
Each piece is handcrafted after your order is placed. Please allow up to 15 business days for your cuff to be made and shipped out.

🖐 How to Find Your Size

1. Wrap a piece of string or paper snugly (just slightly snug) around your wrist bone.

2. Mark where the ends meet, then lay it flat against a ruler.

3. Order your exact wrist measurement—don't add extra room. The 1-inch gap built into the cuff gives you the clearance you need to put it on.

📐 Size Chart

• Small: Wrist : 5.75"–6.0" | Metal Length: 5.0"–5.25" | Gap: 0.75"–1.0" | Total Fit: 5.75"–6.0"

• Medium : Wrist: 6.25"–6.75" | Metal Length: 5.5"–5.75" | Gap: 1.0"–1.25" | Total Fit: 6.5"–7.0"

• Large : Wrist: 7.0"–7.5" | Metal Length: 6.0"–6.25" | Gap: 1.0"–1.25" | Total Fit: 7.25"–7.5"

• X-Large : Wrist: 7.75"–8.25" | Metal Length: 6.5"–6.75" | Gap: 1.25"–1.5" | Total Fit: 7.75"–8.25"

Custom sizing also available. select the custom box and someone will email you once the order has been received.

🔧 Wearing & Adjusting

• Putting it on: Roll the cuff on from the side of your wrist just above the bone. Don't yank it open to pull it straight over your arm.

• Dialing in the fit: Give the cuff a gentle, firm squeeze once to set it to your wrist. Avoid bending it open and closed repeatedly so the copper stays rock-solid.

✨ Care & Maintenance

Keep your copper cuff looking its best with simple daily care:

• Avoid Lotions & Oils: Moisture, harsh chemicals, body lotions, and skincare oils speed up oxidation and cause skin discoloration (greening). Put your cuff on after applying cosmetics.

• Daily Wipe Down: After wearing, wipe the interior and exterior down with a soft, clean cloth to remove skin oils and sweat before storing.

• Light Cleaning: If soiled, wash with mild dish soap and warm water using a soft-bristled brush (like a soft toothbrush) to clear buildup from the weave.

• Rinse & Dry Thoroughly: Rinse completely with clean water, dry thoroughly with a towel, and buff with a soft cloth to restore shine.

For deep cleaning, patina restoration, and long-term wax protection steps, visit our full [Care & Cleaning Guide].